N-alkylamides from Litsea cubeba (Lour.) Pers. with potential anti-inflammatory activity.

Six amides, including a new N-alkylamide (1), four known N-alkylamides (2-5) and one nicotinamide (6) were isolated from Litsea cubeba (Lour.) Pers., which is a pioneer herb traditionally utilized in medicine. Their structures were elucidated on the basis of 1D and 2D NMR experiments and by comparison of their spectroscopic and physical data with the literature values. Cubebamide (1) is a new cinnamoyltyraminealkylamide and possessed obvious anti-inflammatory activity against NO production with IC50 values of 18.45 µM. Further in-depth pharmacophore-based virtual screening and molecular docking were carried out to reveal the binding mode of the active compound inside the 5-LOX enzyme. The results indicate that L. cubeba, and the isolated amides might be useful in the development of lead compounds for the prevention of inflammatory diseases.

Design of Nonsmooth Groove Tire Bioinspired by Shark-Skin Riblet Structure.

As one of the major causes of traffic accidents on wet roads, hydroplaning is prone to occur when the traveling speed of a vehicle rises so high that the hydrodynamic pressure between pavement and tires equals inflation pressure. In this condition, the vehicle nearly loses braking and steering capacity. Inspired by the superior drag reduction function of shark-skin riblet, the purpose of this study is to arrange bionic nonsmooth structures at the bottom of longitudinal grooves to promote the hydroplaning performance without affecting other tire performances. A finite element model of 185/60R15 tire was employed and its accuracy was verified by loading tests with CSS-88100 electronic testing instrument. Meanwhile, a fluid domain model was founded by computational fluid dynamics (CFD) method. The simulated critical hydroplaning speed was in accord with that obtained by the NASA empirical formula. Inspired by shark-skin riblet, three kinds of nonsmooth surfaces were exploited. In addition, the drag reduction rate, shear stress, and flow velocity distribution were compared for different grooves. Then, the optimized nonsmooth structure with the best drag reduction effect among three nonsmooth surfaces was arranged at the bottom of longitudinal grooves for bionic tire. Simulation results demonstrated that the bionic tire obviously decreased hydrodynamic lift and increased flow velocities. With these improvements, the critical hydroplaning speed was effectively improved for the bionic tire. These research results can be applied to the promotion of hydroplaning performance without degrading other tire performances.

Identification and functional study of GATA4 gene regulatory variants in type 2 diabetes mellitus.

BACKGROUND: Type 2 diabetes mellitus (T2D) is a common and complex disease. Dysfunction of pancreatic ß cells, which cannot release sufficient insulin, plays a central role in T2D. Genetics plays a critical role in T2D etiology. Transcription factor GATA4 is required for the pancreatic development, and GATA4 gene mutations are implicated in neonatal or childhood-onset diabetes. In this study, we aimed to investigate whether regulatory variants in GATA4 gene may change GATA4 levels, conferring susceptibility to T2D development. METHODS: The promoter region of GATA4 gene was analyzed by targeted sequencing in T2D patients (n = 255) and ethnic-matched controls (n = 371). Dual luciferase activity assay was used for functional study, and EMSA (electrophoretic mobility shift assay) was performed for detecting transcription factor binding. RESULTS: Thirteen regulatory variants including 5 SNPs were identified. A novel heterozygous variant (32124C > T) and one SNP [31487C > G (rs1053351749)] were only identified in T2D. Both regulatory variants significantly affected GATA4 gene promoter activity in cultured HEK-293 and INS-1 cells. Furthermore, the variant (32124C > T) evidently enhanced the binding of unknown transcriptional activator. CONCLUSIONS: Our data suggested that GATA4 gene regulatory variants may contribute to T2D development as a rare risk factor.

Quantized Ballistic Transport of Electrons and Electron Pairs in LaAlO3/SrTiO3 Nanowires.

SrTiO3-based heterointerfaces support quasi-two-dimensional (2D) electron systems that are analogous to III-V semiconductor heterostructures, but also possess superconducting, magnetic, spintronic, ferroelectric, and ferroelastic degrees of freedom. Despite these rich properties, the relatively low mobilities of 2D complex-oxide interfaces appear to preclude ballistic transport in 1D. Here we show that the 2D LaAlO3/SrTiO3 interface can support quantized ballistic transport of electrons and (nonsuperconducting) electron pairs within quasi-1D structures that are created using a well-established conductive atomic-force microscope (c-AFM) lithography technique. The nature of transport ranges from truly single-mode (1D) to three-dimensional (3D), depending on the applied magnetic field and gate voltage. Quantization of the lowest e2/ h plateau indicate a ballistic mean-free path lMF ∼ 20 µm, more than 2 orders of magnitude larger than for 2D LaAlO3/SrTiO3 heterostructures. Nonsuperconducting electron pairs are found to be stable in magnetic fields as high as B = 11 T and propagate ballistically with conductance quantized at 2 e2/ h. Theories of one-dimensional (1D) transport of interacting electron systems depend crucially on the sign of the electron-electron interaction, which may help explain the highly ballistic transport behavior. The 1D geometry yields new insights into the electronic structure of the LaAlO3/SrTiO3 system and offers a new platform for the study of strongly interacting 1D electronic systems.

One-Dimensional Nature of Superconductivity at the LaAlO_{3}/SrTiO_{3} Interface.

We examine superconductivity in LaAlO_{3}/SrTiO_{3} channels with widths that transition from the 1D to the 2D regime. The superconducting critical current is independent of the channel width and increases approximately linearly with the number of parallel channels. Signatures of electron pairing outside of the superconducting regime are also found to be independent of the channel width. Collectively, these results indicate that superconductivity exists at the boundary of these channels and is absent within the interior region of the channels. The intrinsic 1D nature of superconductivity at the LaAlO_{3}/SrTiO_{3} interface imposes strong physical constraints on possible electron pairing mechanisms.

Shubnikov-de Haas-like Quantum Oscillations in Artificial One-Dimensional LaAlO_{3}/SrTiO_{3} Electron Channels.

The widely reported magnetoresistance oscillations in LaAlO_{3}/SrTiO_{3} heterostructures have invariably been attributed to the Shubnikov-de Haas (SdH) effect, despite a pronounced inconsistency with low-field Hall resistance measurements. Here we report SdH-like resistance oscillations in quasi-1D electron waveguides created at the LaAlO_{3}/SrTiO_{3} interface by conductive atomic force microscopy lithography. These oscillations can be directly attributed to magnetic depopulation of magnetoelectric subbands. Our results suggest that the SdH oscillations in 2D SrTiO_{3}-based systems may originate from naturally forming quasi-1D channels.

Micrometer-Scale Ballistic Transport of Electron Pairs in LaAlO_{3}/SrTiO_{3} Nanowires.

High-mobility complex-oxide heterostructures and nanostructures offer new opportunities for extending the paradigm of quantum transport beyond the realm of traditional III-V or carbon-based materials. Recent quantum transport investigations with LaAlO_{3}/SrTiO_{3}-based quantum dots reveal the existence of a strongly correlated phase in which electrons form spin-singlet pairs without becoming superconducting. Here, we report evidence for the micrometer-scale ballistic transport of electron pairs in quasi-1D LaAlO_{3}/SrTiO_{3} nanowire cavities. In the paired phase, Fabry-Perot-like quantum interference is observed, in sync with conductance oscillations observed in the superconducting regime (at a zero magnetic field). Above a critical magnetic field B_{p}, the electron pairs unbind and the conductance oscillations shift with the magnetic field. These experimental observations extend the regime of ballistic electronic transport to strongly correlated phases.

Electron pairing without superconductivity.

Strontium titanate (SrTiO3) is the first and best known superconducting semiconductor. It exhibits an extremely low carrier density threshold for superconductivity, and possesses a phase diagram similar to that of high-temperature superconductors--two factors that suggest an unconventional pairing mechanism. Despite sustained interest for 50 years, direct experimental insight into the nature of electron pairing in SrTiO3 has remained elusive. Here we perform transport experiments with nanowire-based single-electron transistors at the interface between SrTiO3 and a thin layer of lanthanum aluminate, LaAlO3. Electrostatic gating reveals a series of two-electron conductance resonances-paired electron states--that bifurcate above a critical pairing field Bp of about 1-4 tesla, an order of magnitude larger than the superconducting critical magnetic field. For magnetic fields below Bp, these resonances are insensitive to the applied magnetic field; for fields in excess of Bp, the resonances exhibit a linear Zeeman-like energy splitting. Electron pairing is stable at temperatures as high as 900 millikelvin, well above the superconducting transition temperature (about 300 millikelvin). These experiments demonstrate the existence of a robust electronic phase in which electrons pair without forming a superconducting state. Key experimental signatures are captured by a model involving an attractive Hubbard interaction that describes real-space electron pairing as a precursor to superconductivity.

Writing and low-temperature characterization of oxide nanostructures.

Oxide nanoelectronics is a rapidly growing field which seeks to develop novel materials with multifunctional behavior at nanoscale dimensions. Oxide interfaces exhibit a wide range of properties that can be controlled include conduction, piezoelectric behavior, ferromagnetism, superconductivity and nonlinear optical properties. Recently, methods for controlling these properties at extreme nanoscale dimensions have been discovered and developed. Here are described explicit step-by-step procedures for creating LaAlO3/SrTiO3 nanostructures using a reversible conductive atomic force microscopy technique. The processing steps for creating electrical contacts to the LaAlO3/SrTiO3 interface are first described. Conductive nanostructures are created by applying voltages to a conductive atomic force microscope tip and locally switching the LaAlO3/SrTiO3 interface to a conductive state. A versatile nanolithography toolkit has been developed expressly for the purpose of controlling the atomic force microscope (AFM) tip path and voltage. Then, these nanostructures are placed in a cryostat and transport measurements are performed. The procedures described here should be useful to others wishing to conduct research in oxide nanoelectronics.

Anomalous high mobility in LaAlO3/SrTiO3 nanowires.

Nanoscale control of the metal-insulator transition at the interface between LaAlO(3) and SrTiO(3) provides a pathway for reconfigurable, oxide-based nanoelectronics. Four-terminal transport measurements of LaAlO(3)/SrTiO(3) nanowires at room temperature (T = 300 K) reveal an equivalent 2D Hall mobility greatly surpassing that of bulk SrTiO(3) and approaching that of n-type Si nanowires of comparable dimensions. This large enhancement of mobility is relevant for room-temperature device applications.